The concentric reducer's application

     Concentric reducers have a common center line. If the center is not in the same line, that is eccentric reducer. Reduers are used to connect 2 pipeces of pipes that they have different diameters.  For example, when a 1" pipe transitions into a 3/4" pipe and the top or bottom of the pipe doesn't need to remain level.This pipe reducer may be used when there is a single diameter change or multiple diameter changes.

Specifications

1. Type: concentric(CON.) & eccentric(ECC.)

2. Outside diameter(OD):1/2’’-72''

3. Wall thickness(WT):SCH5-XXS

4. Standard:ASME B16.9, ASME B16.25, MSS SP75, MSS SP43, EN10253, BS1640, BS1965, DIN2616, GOST17378

Both seamless reducers and welded reducers are our product range. We promise to supply pipe fittings with good quality and competitive prices. Welcome to visit our factory.